ZQLX-120盤條預處理生產線適用于高、中、低碳鋼絲拉拔前的預處理。本產品通過機械彎曲、摩擦、高壓水沖洗、電解拋光等方法去除盤條表面的氧化皮，并經過涂層、烘干在盤條表面形成一層潤滑劑載體，減少后道拉拔過程中的毛絲、斷絲現象，延長拉絲模壽命，保證拉拔的高速順利進行。設備包括上提拉放線架、剝殼鋼刷除銹機、電解酸洗、硼化、烘干、自動控系統等，采用在線處理方式，與拉絲機組組合為連續生產線，生產效率高，產品質量穩定。

常用盤元規格為Φ5.5—Φ8.0 mm, Φ8.0 mm以上可定制，處理速度在2m/s 以上。

ZQLX-120 Wire Rod Pretreatment Line is suitable for the surface treatment of high, medium, low carbon steel, and stainless steel wire rod. The line removes the oxide coating on the wire surface through mechanical bending, friction, high pressure water rinsing, electrolytic pickling and then covers the wire surface with a layer of lubricant through coating & drying to ensure efficient wire drawing and prolong the service life of the drawing die. The line included up-pulling pay off frame,combined descaling machine, electrolytic pickling, boronising, drying machine and auto control system. It adopt on-line processing, and realize continuous production in combination with wire drawing machine,with high production efficiency and stable product quality.

The wire diameter is Φ5.5—Φ8.0 mm ,more than Φ8.0 mm is available , the speed of treament is more than 2m/s.